Etek1 problems

[diaboro919]

after a recent walk on, ive aired up my marker and it starts firing on its own. im not to tech savvy with it as its something new to me. all ive done is clean it down on the outside, cleaned the chamber and bolt. im afraid to open it incase i mess something up but if anyone has any advice, ill gladly take it.

 

[diaboro919]

just noticed that if i turn the air on slowly, it only fires once. hope that helps

 

[Liam92]

have a look inside the gripframe and see if there is any debris sitting against the microswitch. also have you been adjusting your trigger in any way?

 

[diaboro919]

have a look inside the gripframe and see if there is any debris sitting against the microswitch. also have you been adjusting your trigger in any way?

from what i can see (assuming if im seeing clear tubes im in the right place) its clean of debris. i haven't touched the trigger at all. only thing ive done since buying it (a month ago) was tighten the front grip and a walk on

 

[Liam92]

hmm okay. best to ask Nicky T but in the meantime just try all the dummy stuff like get a new battery in it and clean everything out and relube it. am i right in assuming that this problem developed while you've had it or has it always done this since you bought it?

 

[Nicky T]

Sounds like it's a case of the solenoid being over-pressurised when it is gassed up quickly.

Change the LPR body o-rings for 14x2 NBR 70's and you'll be right

Nicky T