Etek shooting problem

[eLLiot-]

Today I was playing paintball and i got to my chrono, shot some air to see the bolt working etc and shot some paint, as i shot the paint what happened was the paint just dropped out the bottom. I changed my velocity and everything that was needed too be changed and i could only get a maximum of 88 fps... and in the end it stopped firing all together.

Now im going to send it to planet eclipse but firstly could anyone give me abit of help

Cheers

P.S
If all else feels and i send to planet, how do i send it to planet. Also just to help out i think iv done something to the dwell settings but im not sure

Thanks again

 

[chris-d]

Maybe try altering the dwell setting, worth a try...

 

[Gassy]

did you have the bolt pin located in the rammer properly

you can do what you want with the hpr and lpr and balls will still only roll out of the barrel

 

[Devrij]

I'd try checking/upping your dwell (it's the purple one, 13ms is stock I think), then return the screw on your LPR to flush with the endcap. Then, make sure you're turning the HPR screw the right way (gotta say it clockwise looking from the bottom is lower velocity). Clean and re-grease your HPR and relube the rammer. Lastly, make sure your bottle is screwed in all the way (though with an OOPS that'd be hard to screw up). Can't think of much else, I'm sure the planet dudes will give you the right answer, because they are made of awesomeness.

 

[Dave284]

ooh oh oh oh oh, this one time, i took the bolt pin out of my ego, and accidently put it in upside down, that caused velocity problems