Etek RoF modes

[Rat]

Hi there folks, can anyone help me please?.

how do i make sure my Etek is in keeping with the up and coming RoF rules (10.5bps)?

thanks in advance.

 

[Cam Mc]

To ''make sure'' you go into set-up mode, press the on button for 0.5 seconds until the G goes green (Max RoF with BBSS on) pull the trigger once and release, look st the E G O console(E=10s G=1s 0=0.1s) so for 10.5bps you should have, 1 flash of E and 5 flashes of O, or you could have 10 flashes of G and 5 of 0

Also you will need to go into set up mode, press the on button twice until G goes blue (Max RoF with BBSS turned off) then follow the rest.

Hope this helps

Cam

 

[Devrij]

If you didn't know, to get into the setup mode, you need to hold the trigger in while you turn on the marker and the led's should blink white. If it doesn't do this you need to turn the tournament lock off by opening the grips up and pressing the red button while it's switched on, then repeat the holding the trigger in while you switch it on bit.

Also, make sure you're on ramp3 setting for Mills ramping (when the G is red that means you're on the firing mode setting), the G should blink 5 times for that one. Unfortunately you can't change the ramp kick-in so you'll have to pull 7.5bps to get it to ramp to 10.5 lol.

I should add that you can download the etek manual off of the planet eclipse website www.planeteclipse.com, which explains it very clearly with shiny pictures.

 

[Rat]

thanks fellas think i've got it done.