When I put gas in it leaks out the top hole. Can anyone help me on what it is and tell me what I do to stop it. Cheers
etek gas leak problem
- Thread starter Sami4
- Start date
When I put gas in it leaks out the top hole. Can anyone help me on what it is and tell me what I do to stop it. Cheers
This /\
Also if that is how far you turn your on/off, I'd give it a quarter turn back out to avoid shootdown. Not sure about the eclipse asa's but some don't like being on all the way. I have a cobra coil remote for example and if I tighten the on/off all the way, the valve pin pushes down so far on the tank pin that it kind of seals itself and makes for a very restricted airflow.
sorry mate i dont get what you mean ? your asa cap should always be screwed all the way in ? if you are at CC next week then let me know and i will sort it out for you
now its leaking out the bottom hole, or it could just be changing between the two, not to sure. i changed the bottle o ring
if it's leaking from the front then you need to inspect/replace the orings on your OOPS pin.
A stupid question but are you trying to screw the bottle into the asa as it is in the pic?
With the oops knob screwed in?
With the oops knob screwed in?
if it leaks out of the front hole (nearest on/off knob) then the o rings on the oops pin are dry or damaged, lubricate them or replace if neccesary
if it leaks out of the rear hole (nearest the tank) then the tank o ring is damaged, so replace the tank o ring
if it leaks out of the rear hole (nearest the tank) then the tank o ring is damaged, so replace the tank o ring
was leaking out nearest to tank, now its nearest to on off knob, how do i get into the asa to check the orings? or whats this OOPS pin? cheers guys