Etek 2 - wont shoot

[pedro61]

Cleaned my Etek 2 the other day in prep for the big game, came to use it last nite at training and it wont shoot properly. the balls just roll out the end when i shoot. tried increasing the fps but made no difference.
would over tightening the valve plug screw have anything to do with this?
ive just put a new battery in it.
Any help would be great

cheers
Pete

 

[Random Invert]

Your reg mite need cleaning, happened to my ion a while back borrowed a reg worked fine, stripped and cleaned mine sorted the issue out.

 

[tricky m]

have you wound the lpr in too far? think it should be flush with casing. i had similar problem with ego. that was fault.

 

[pedro61]

yeah lpr is flush with the casing, was the first thing i checked mate

 

[tricky m]

only other thing i can think of is if bolt pin not in correctly.

 

[Parksy]

You havent done the old greasing of the rammer instead of oiling it have you? is one of the common ones.

 

[pedro61]

nope only thing ive used is the eclipse gun oil.

 

[Nicky T]

Sounds like you've put the rammer housing back into the body upside down - if thats the case no air can fire the paintball hence your issue