Any ideas how to get my velocity at a more constant level as its all over the show at the moment..?
Ego velocity?
- Thread starter Gilberto
- Start date
This is from memory, i think:
Dwell= 8
Lpr= level
Paint= Blaze (Draxxus)
Barrel= Standard (88?) and Unitec (93)
Get the prob with both barrells?
Dwell= 8
Lpr= level
Paint= Blaze (Draxxus)
Barrel= Standard (88?) and Unitec (93)
Get the prob with both barrells?
Clean and relube your LPR and Reg, and clean and oil your Rammer and that should help a little with the inconsistancy
check your qev's.
to do this, push the bolt forward when aired up, quicky, see if it is "farting"
check rammer orings for wear
the other issue is it may be the noid, check for holes/leaks, and maybe relube it.
it could be inconsistant paint.
how drastic is the velocity variation??
to do this, push the bolt forward when aired up, quicky, see if it is "farting"
check rammer orings for wear
the other issue is it may be the noid, check for holes/leaks, and maybe relube it.
it could be inconsistant paint.
how drastic is the velocity variation??
Up the dwell a couple of clicks and wind the lpr in 1.5-2 turns from flush. Then set hpr level to achieve 280-300fps.
If the paint in anything less than round it will give you a big variance in velocity.
I have already checked seals and re-lubed rammer etc...
I will have another go when i finish work and try all suggestions, then get back to you.
Cheers guys
I will have another go when i finish work and try all suggestions, then get back to you.
Cheers guys
you want dow for stuff like your reg but you need eclipse oil or something similar for your rammer.
My mate had the same problem with his...is it an 06? We tried most things that have been listed, and in the end he sent it off to Eclipse and they replaced some of the internals (cant remember what right now..) so worse case...send it off.