Ego Trigger problems

[Dicorpo]

Hey guys, I took out my 06 about 3 days ago and started playing with it. i.e. just seeing how fast i could pull the trigger, when i noticed the first time i did it, the trigger was sticking until i got it going, then it moved more loosely. Now i've done the same every day since and the trigger is just stickings worse and worse, like the spring or magnet have gone.

Shout goin out to any ego techies out there. Help please

Thanks

Dicorpo

 

[mdking]

It could be the trigger pin, if it gets dirty it could cause the trigger to stick....

I would take the frame off, take out the trigger and clean the frame and all parts.

 

[conion92]

defo sounds like the trigger pin as this also happened to me, took it out cleaned it, put it back in and have had no problems since

 

[Dicorpo]

thanks guys, now...all i need to know is how to take out the trigger pin, any vids on planet website to help with this? Or am i better off waiting till i next see my local sites techie?

 

[lemonadeX]

Found this which should help:

http://www.pbnation.com/showthread.php?t=1787251

-Will

 

[Dicorpo]

cheers Will.

 

[mdking]

There should be the manuals on planet...get the ego v2.. that should have the instructions for you to take the trigger out..

 

[Dicorpo]

LoL, im still not 100% sure, i'll wait till i see my local site techie in a couple of weeks.

Thanks guys

Dicorpo

 

[Dicorpo]

ah right,m cool, i'll check it out.

 

[spreadz07]

Take the grip off the body by un doing the 2 frame screws. in the top of the trigger is a small bolt holding the trigger pin in. loosen and push the pin out. Wahay, there you go!!!
Easy should take about a minute.
Nige