ok just playin with the 05 in training mode and the trigger pin (pin above the trigger blade) seems to be sliding about
i take it this isnt normal and how should i secure it?
i take it this isnt normal and how should i secure it?
ego trigger pin
- Thread starter Samwell
- Start date
Seperate the frame from the grip,look inside the grip there's(or should be) a grub screw that stop's it from coming out,either come lose(?) or fallen out
ego trigger movement
When you pull the trigger the pin should feel like its turning. Assume this what you are talking about. Provided you dont have a custom ball bearing trigger.
If the pin is loose and looks like its coming out from the frame then do what the above post suggest. tighten the screw again the pin. Jobs a goodun
When you pull the trigger the pin should feel like its turning. Assume this what you are talking about. Provided you dont have a custom ball bearing trigger.
If the pin is loose and looks like its coming out from the frame then do what the above post suggest. tighten the screw again the pin. Jobs a goodun
If you have lost that screw I should have a spare one
Joe
Also, if doing what tiffer said, make sure to take the solenoid and eye wires out FIRST!
Joe
Joe
Also, if doing what tiffer said, make sure to take the solenoid and eye wires out FIRST!
Joe
if its an ego 05 see if the grub srew has stuck to the magnet on the top of the trigger frame.. it did that to me and i couldent find it
just a thought
just a thought