Ego Trigger - FBM Wave

[Just Curious]

Ok, Got myself one of these FBM Wave Triggers for my Ego. Installed it with no real problems & it looks good.....but..............
the damn thing seems to be skipping shots! I'm getting 1 shot for every 2 pulls. Its like the trigger pulls are not being recognised.

Has anybody else had this problem with these triggers? Its not the marker as I have now put the original trigger back and it works fine. An suggestions/assistance would be appreciated.

Jimmy

 

[Syltiz]

A bit of a guess here, but is it not the filters that need resetting for the new trigger?

 

[KOHI]

ok heres the bad news the part that brakes the beam at back of the trigger is to small,but you can mod it so it works easy enough.

 

[Just Curious]

Ok,,thought that it may be a bit small.....so how do I go about 'moding' the trigger?

Ta

 

[KOHI]

ok you need to make the depth of the trigger part going into the frame 1mm ish thinker.
you can use modeling putty or soft body filler then rubb it down to size you want.
if you look on pbnation they have hole threads about it to
rgds E

 

[Just Curious]

Cheers m8

 

[Markie C]

make sure the putty is set or molding stuff is so none of it will go the senser

 

[Didz]

had the same problem with mine.
if you look at the bit that breaks the beam, on mine it was slightly bent. all i did was straighten it and its working ok.
mate had the same problem with skipping shots and he done was the same, now his is working ok as well.

 

[Flaming Dave]

had the same prob and know of one other also just a gental bend on the bit that breaks the eye beam so it passes correctly through the eye and its fine