ego skipping shots?

[Revolt]

eeek, shrugg, help? cool

 

[jahlad]

give us a little more info please

have you tried a fresh battery? what air system are you using, when did you last use it, is it making any strange noises? have you tried adjusting the trigger?

 

[Dusty]

trigger activation grub screw not far enough in?

 

[Revolt]

what screw is that? :| the pull is well past the activiation point, it just seems to miss 2/3 shots if firing at high speeds for some reason and the odd shot at lower speeds

 

[Revolt]

give us a little more info please

have you tried a fresh battery? what air system are you using, when did you last use it, is it making any strange noises? have you tried adjusting the trigger?

yeah good batteries, errr it skips without air and with air ;p (noid clicking) and yeah, just now i have a bit of a long pull with pritty much no magnet strength

 

[lemonadeX]

Possibility that its the loader? I know when I had a little leftover glue in the feedtube, every so often a paintball wouldn't fully load into the breach and wouldn't shoot for that reason.

Give it a try without paint, just to eliminate that as a possibility.

EDIT: Just saw your post above Ignore this then.

-Will

 

[Revolt]

it does it with and without paint ;p

 

[Dusty]

actually now i think about it, the trigger activation is done by a part of the trigger itsself. if i remember rightly, it is the bottom screw you need to adjust. screw it out to let your trigger activaton point move further into the gripframe and see if that helps.

 

[rayko]

What have you set the cap for 'eyes off' and 'eyes defective' modes to?

 

[SWAT-Jay-]

i would hazard a guess at the trigger bounce filters, what are the trigger in and trigger out times set at. Find this out by accessing the setup menu inside the trigger.
If set wrong it may not detect your pull as valid.