ego reg output?

[Everyinchtheanimal]

As per title, I am trying build a partsbox cocker and the only vert reg I have is one off of an ego 5/6 I am struggling to get the cocker to cycle right. What is the output of the reg? As no matter where I have the adjustment screw it does F A! I know all the lpr is set right as I took that from a working gun a few weeks ago. Also the velocity doesnt go up as I mess about with the reg adjustment. This is why I think it is the ego reg.

 

[renie]

Not sure of the output mate? but Have you checked your main spring? see if it has enough oomph it could be its not opening the poppet far enough,

 

[EELZ]

Yeah, adjust the ivg at the back of the gun ( clockwise should increase velocity) you need to take the cocking rod out 1st

 

[Everyinchtheanimal]

Yeah I tried that turning the ivg up got it to the right velocity, its just I didnt have any adjustment on the ego reg. The cycling problems was a swollen o-rings on the bolt causing too much friction and the rear ram barb blocked so not letting air through to push back block forwards. Its all sorted now I rebuilt the ego reg and now I have full adjustability again and a nice smooth cocker now.
cheers guys for the help.