Ego LPR pressure

[TheRenton]

My Ego shoots great, but i'm a bit concerned that the operating pressure is a bit high. On my Star FRM guage, the pressure states 100psi. My other team mates reckon thats a bit high, cos their timmys shoot at a bout 60-80psi.
What 'should' the operating pressure be?
I don't really suffer from any kick, I have the LPR 2 turns in from flush and dwell set to 10ms.

 

[Lovetone]

my lpr reads over 100, prob 105- 110psi on my star gauge

as far as i see it, if it aint broke dont fix it
i get good efficieny and little to no kick
so i dont feel the need to have a lower reading gauge just "because"

$0.02

 

[John C]

This is just a guess but I reckon the guys at Planet Eclipse might know what kind of LPR pressure you should be at.

 

[TheRenton]

Any EGO tech such as Markie C should know I reckon, hopefully he'll reply to the thread

 

[andyp1]

the LPR pressure, should be about 100psi, all guns are different, you can get the LPR down to 25 psi with a newton kit on an angel, but a standard one is a lot higher.

timmies must need a lower LPR pressure to opperate, but yours isnt a timmy, so ignore what your mates have to say!

example list: -

cocker LPR pressure approx 150psi
ego 05 100psi
ego 06 50psi
timmy 80psi
angle 25 - 100+ psi

etc etc