Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Ego eye's ? problem

Shep

New Member
Oct 30, 2003
206
0
0
Has anybody else with an Ego (I mean the marker not any1 with an ego as that would inc.99% of the members :D ) Had any problem with the eye's as mine would appear to switch themselves off for no apparent reason other than its a realy bad time to do it:( .I was at a walkon at the weekend 3 ego's present & all had the same problem in varrying degrees, 1 was unusable,mine wasn't terrible but i had about a dozen chops (not paint breaking down the barrel) after the first 3-4 started checking if the eye was on & found it was off & I hadn't turned it off:confused: .
The guy who had the 1 which was unusable was shooting over the practice area & I was watching his screen the eye was on after 5-6 shots it swiched off,stopped firing switched eye back on same thing within a couple of dozen shots :confused: .
Just want to know if any1 else having any probs?
 

johnunleashed

CRUSADERS
Dec 13, 2004
76
0
16
PRESTON
Visit site
ego

hi i was the lad with the poor ego, i checked with my mates ego if all the settings where the same and not one of them was! so i whent to set the gun back to factory settings and the gun would not, my mate tried to re set his and it would not,could you try and see if your gun will re set. i have set all my settings as to what was on the cd with the gun, but i have just set the breach time to 3 and the gun is showing 14 bps , and i shot 600 balls and had no problem? but will try the gun in the cold tomorrow and see how it does , thanks john sorry it,s long winded
 

Shep

New Member
Oct 30, 2003
206
0
0
Manual has been read but hey it wouldn't be the first time I missed something:)

John i will have a look see if mine will reset to factory settings allthough I'm sure the only thiong I've altered is the trigger filters:)
 

Shep

New Member
Oct 30, 2003
206
0
0
Well I've had another tinker & have noticed that if you pull the trigger with a ball in the breach (but have no air & are inside the house )& the ball doesn't get fired the eye switches off, so wether something is duplicating this when the marker is firing I don't know, but could be a possibility?
John set mine back to factory with no probs m8 ,checked settings & only thing changed was the trigger filter.Although as i said mine wasn't misbehaving as badly as yours. will see how it goes on Sunday at Notts.Skirmish :)
 

Nicky T

Platinum Member
May 9, 2002
1,146
146
88
47
Bury, Lancashire
www.patreon.com
The Ego is programmed to switch the break beam sensor system off if it detects a jam (or thinks it has). This scenario can be simulated by switching your Ego on (with no paint or air), moving the bolt forward so that it closes the breech and then pulling the trigger. Note how the BBSS will turn itself off.

Check that your eyes are clean and that they are properly aligned in the body - as these are the most likely causes of the problem you are experiencing.

Nicky T.
 

Shep

New Member
Oct 30, 2003
206
0
0
Cheers Nick I will check that they are aligned as i know they are clean or they are now that i cleaned them after choping;)