ego 7 not firing!!!

[rocknroll]

ive tried a new battery, cleaned the eyes but still no luck! can anyone help??

 

[Codiak]

checked weather board is set to switch or optical sensor for the trigger?, cos lets say its set to optical sensor and your not breaking the beam try setting it switch instead see if that sorts it.

 

[Ali]

try checkin to see if the noid connector has come loose possibly

 

[Kitty]

define not firing?

Are you getting a partial cycle? Is it just clicking? Is nothing happening? Is air leaking?

 

[Rivalkidz Welshy]

is the solinoid clicking? if you cant hear it try making the trigger looser so you have to push it further.... i bought mine second hand at that was the problem with mine

 

[rocknroll]

the solinoid is correctly fitted onto the board.

basicly air is going through the marker, but it wont fire. (even with paint in the breach)

i fully stripped and cleaned it this morning and still nothing.

 

[Impulse raider]

Have you been into the settings at all >>??

Try turning eyes off first see what happens.

Then we will try going through the settings..

If you have yahoo messenger i can try talk you through it on there..

 

[rocknroll]

yeah i went through the all settings and manual cover to cover.

well i was at training yesterday and i tryed everything i could to get it working but nothing was happening

 

[Impulse raider]

Ok try this.. go into board set up and set it back to factory settings.

When you have done this make sure that the trigger isn't actually sitting across the opto eyes ..

If it is set the trigger from opto to switch..

Also if you have a spare set of eyes replace your current ones..

 

[rocknroll]

right do all of that, apart from changing the eyes as i dont have a spare set.