Has your 09 had the barb upgrade on it >>??
Have you had the Rammer out and checked the middle o'ring ??
Are you making sure the Cure 2 pin is correctly located into the Rammer Pin Slot.
What Setting is the marker set on ??
Battery i see already has been asked, but my advice would be to try another as you often can get a bad batch.
If that centre o'ring has shredded it could have got into the noid, i had mine do that and it certainly wasn't pretty trying to tease the pieces out of the noid.
Perhaps give the HPR and LPR a good clean/check o'rings and Lube.
Check your eyes are clean, if the eyes are showing but the brackets show squared and not curved like this (o) then you also have an eye issue..
I could rattle on but hell what do i know
..
