ego 08 help please

[NUGGET sa]

hi i got an 08 ego works great sent some parts off to get anno by sloth put it back together and can get it to shoot hight than 250-260 with the reg turn all the way out.
change bat
took lpr cap off no crap in it
to reg off everything looks good

what else could it be thanks

 

[Chinn]

what parts you get annod?

 

[NUGGET sa]

feedneck, eye cover,barrel.lp cap,trigger frame,ram cap,asa,reg but only half the half that goes to the body top half

 

[Impulse raider]

dwell

Nugget try checking what your dwell is set on , could have reset itself .

I currently run mine between 11.5 - 12.5

 

[NUGGET sa]

Nugget try checking what your dwell is set on , could have reset itself .

I currently run mine between 11.5 - 12.5

its on 12.5

could it just be orings is it worth stripping off and and putting new ones on and re lube and oil evernthing again

 

[NUGGET sa]

on my 06 i put a ti rammer in and that would not go above 240-250 took it out and it ran at 280-290

could it have something to do with rammer or rammer cap

 

[Impulse raider]

lpr

How far out have you left the LPR grub screw ?? , try screwing that in a tad , if all fails strip and put new o'rings on the rammer etc and relube all moving parts

 

[NUGGET sa]

How far out have you left the LPR grub screw ?? , try screwing that in a tad , if all fails strip and put new o'rings on the rammer etc and relube all moving parts

today it was all the way out at 9 in the moring and was shooting 245

think a rebuild is coming tomor ,great as if i dont have other things to do