ego 05/06 valve spring! help needed!

[blackplasma]

found answers, please delete

ive baught a ti ram for my ego 05 and the lightened spring matches the stock valve spring,
ive also baught a laav and the spring supplied is thinner than the stock spring (2/3 of the diameter), as is the coresponding nipple bit of the laav cup seal!
i can use the supplied laav spring with the laav cup seal but i cant use the stock or lightened spring with the laav as it wont sit nice on the valve nipple,

the main problem i have is that the laav spring wont sit very well in to the opposite end (by the lpr) because it is smaller and i think its gonna try to get through the hole in the middle of the bit which should hold the spring steady!

1. is there a diameter difference between an 05 and 06 valve spring and cup seal nipple?

2. is the lavv designed for an 06 not an 05?

3. would adding an aluminium disc to the lpr end (to stop the spring going thru) impeed the functioning of the gun?

4. should i worry about the spring moving around at that end?

thanks in advance

 

[angeldan]

Mate i've had problems with my angel and the best thing to do is to phone the dealer up and ask for a techy and ask them about it, ask them what should be done and if they are good, go to your local eclipse sponsored site and give it to them to fix.

 

[blackplasma]

1.no
2.no they are either
3.no
4 maybe, use a stepped washer to sort.