Egg2 & Voodoo lorise

[Parksy]

Anyone know if the Egg2 feedneck sits in a voodoo lorise enough to keep it secure??

Or are you better off using a twister lorise?

Cheers

Dave

 

[jahlad]

not sure but if its any help i had to sand my halo to fit it in one

 

[Ben Frain]

Dave, my mate just put one of the low rises on his impy and my Evo II (sanded to fit the Speed I had) fitted his low rise - very similar size.

Chances are if you have sanded it to fit the Rock, it will fit the Impy fine too...

 

[Graham-DV8]

On sunday I tried to put an Egg2 onto my impy (which has a Voodoo low rise) and it was a very tight fit, and the egg feed neck would need sanding down just a tad.

 

[Parksy]

Thanks peeps

Dave

 

[blubbs73]

just a quick one why sand down a 100 quid hopper rather than a 20 quid low rise

 

[chunk.Clan]

With the twister no sanding is required and it holds the hopper tight. Plus if you ever come to put the hopper on a different gun you won`t have to worry about the feed neck being knackered.

 

[blubbs73]

but your hopper might b too small i know which one i would like to replace

 

[pgaglio]

Originally posted by blubbs73
just a quick one why sand down a 100 quid hopper rather than a 20 quid low rise

you can buy new feednecks (called "raceways") for the Evo II. They cost $5 per half of the feedneck or $10 for both halves.