the marker has to be capable internally to run at low preasure ie bolt ecOriginally posted by iplaymindgames
actually it wouldnt depend on the gun set up that much.. it would depend more on the tank and regulators. even if you have a gun that can work at say 200psi, your tank would still be spitting out 850psi. unless you have a lower pressure tank, regulator, or even an on/off.
if you want to run it at lower pressure, get an on/off and add it to your drop. it's a cheaper alternative to a reg.
re-read my postOriginally posted by ChrisWhiteSTEL
They wont recock below 700psi without modification is what you mean Dave .
There are low pressure spyders, piranhas and so on. But running at a lower pressure simpley means there internal operating pressure not necceserily the amount of air used on each shot.