eclipse cocker issue, help required

[Salva]

im having a problem with my 04 eclipse auto cocker and was just wondering if any1 could shine some light on the subject before i end up sending it off.

basically the airs not getting through the gun,
i screw the tank in and the air gets through the asa fine but isnt getting to where it needs to be from there.
as far as i could see all the o rings were fine but my knowledge isnt great. i dont have much of an idea of how it gets from a to b as such but all i know is its not getting from the inline reg to the end point haha

sorry my descriptions ****e but if any1 can make sence of it and help or point me in the direction of a cocker tech it'll much appreciated!!

cheers Salva.

 

[Hawkins]

Right.....

If you put turn the maker on gas up and what not cock the gun and fire, is the only thing to happen the cocking rod to move ? ( turn the eye off )

Have you played with the high preasure regulator to make sure youve not got it closed??

When you fire does the ram move the back block at all ??

if you find that the high preasure reg is closed then give me a shout and ill talk you through timing your marker...

Do you have an On Off Asa ? It Is On ?

 

[Lucky]

Is this a new problem or has the gun never been running in your hands?

What air supply are you using?

 

[dazafox]

cocker

I had a fault with the air not getting into the gun had to have a new lpr from belsales.

 

[Salva]

the gun has worked in my hands
ive tried both an on off asa and a normal one

the cocking rod doesnt seem to be moving either so a paintball wont actually drop in to the breech (it will cock once it seems then not fire)

the back block is moving back and forward tho

im using a 4500psi HP bottle

the guy at belsales seems to think its electrical but no where can get the parts and eclipse wont touch it.

any 1 wanna buy a ****ed cocker haha?

 

[Lucky]

If you pull the cocking rod back and pull the trigger, does the gun go clunk as the solenoid releases the hammer?

 

[Salva]

the hammer wont release, been on the phone to the guy at belsales for 25 minutes, went through every thing and he reckons its electronic and said the parts will be harder to find than rocking horse ****!

so i think it might be getting sold for spares :'(

 

[Hawkins]

ok so the gun cocks but wont release the lug... is it making a clicking noise at the sear and the solenoid ?

 

[Hawkins]

if it doesnt, then take the grip frame off to release the lug from the sear and turn the eyes off... does it click then ?

 

[Hawkins]

if this is the case then either your eye is dirty/broken or the lug is sitting too far downwards and it has too much grip on the sear for it to be released... try unplugging the eyes and shooting if this doesnt help then id suggest resetting the lug, which is done by taking the bolt out and droping an allen key through the hole ontop while pulling the cocking rod slightly youll feel it drop in, unscrew the lug till it no longer catches on the sear and then wined it back down till it catches again...

this is if the sear and solenoid is clicking btw ^