eblade help

[cookie_834]

hiya peeps,
i didnt no if this was a newbie tlk or techincal so i put it in here. rite the problem is simple........

a) wots the diffrence between "classic" and "semi" on the eclipse eblade?

b) the new MPNAL rules state u cannot fire ovr 15 bps. how the poo do i restrict myself if i manage to gt that fast!?!??!!?

any help will b much appreciated

oh and btw im looking forward to this sunday lads, or shood i say ladies? first match of the season. look out for the uttoxeter sharks, we new, we fresh, we gonna die

 

[rayko]

Classic = behaviour of the old skool slide trigger cockers. Pull the trigger and it will trip the sear, and so long as you hold the trigger back, the bolt will remain in the back position until you release the trigger where the bolt will close.

Semi = pull the trigger and it will do the above as one trigger pull. Holding the trigger back will have no effect.

Dunno about B.

 

[cookie_834]

so wood classic allow me to fire faster? or will it make a shread of diffrence? and im stuck with B aswell

 

[Nickyboy]

nah classic will make you fire slower.

Bit hard to explain but as you press the trigger back, the bolt that whacks the paintball would copy the placement of the trigger.

At rest = Bolt at rest
Trigger pulled = firing bolt back.
let go/trigger back to start = bolt will relaease and shoot the ball.

on semi if you pull the trigger back it will complete the above stages regardless of where your trigger is.

You can get away with not quite full pulls of the rigger and complete firing actions in semi not in classic.

When I got my gat it was set in classic, now it's in semi it's much easier to walk and fire faster.

 

[cookie_834]

ahhhhhhhhhh i see the light. so if i gt this rite thn for evry pull the block makes a full cycle in semi but in classic wen the trigger is bak the block is bak.......hmmmmm cool cool.

so then just one last thing....how the poo do i cap my rate of fire? i gt to find this out and spray paint my hopper by sunday sum1 coodve told me u aint allowed clear hoppers b4 i bought one!!!

 

[Robeenio]

dude the 15bps cap is not in place for the PA yet neither is the ramp rule so you wont need to worry about that for a bit.

at the moment the manufacturers are looking at ways in which they can limit things and as soon as the rule is put in place i'm sure the board will be alive in ways to cap the various markers out there

keep an eye on the tech section for anything new that pops up

peace and mount crakatoa

 

[andyp1]

plannet state that their new (ish) zero-b board will be future programable to sort this problem, link below

http://www.planeteclipse.co.uk/site/prodView.asp?prodID=2085

 

[Nickyboy]

Well if you got your clear hopper cheap off the classifieds you now know why.

Also theres loads of rules to a tournement, no shouting in the dead zone is one I couldn't get my head round. Check out the tournement website and have a read, you don't want to get any penelty points cos your johhny wasn't on etc….

 

[Skeet]

Go to Halfords in teh boy racer section...buy tin of "Rear Light Tint" spray...red, black, whatever...hold your egg in your hands, and cough loudly....now, take teh seperate peices of the egg, remove boards and motors, and any broken bits of plastic...apply a thin, even coat of tint to teh inside of teh shells...let it dry, then repeat till you have the desired tint.

Put egg back together, after replacing with new lid and Batt cover.

 

[cookie_834]

halfords? stuff that ill go to focus its cheaper thanx tho. do i jst spray the inside? or the outside too? i think i mite try sumthin fancy, mayb stencil a shark onto the hopper as we're the uttoxeter sharks. also does any1 know if thyre inforcing the "no metal studs" rule? cos i dnt wnt to buy new studs, that wood jst b suckty suck suck