Eblade again! How do people set up their triggers?

[Skeet]

Guys...after being able to get a good long string going on an IR3 t'other day, and my experience with an 03 shocker...I was wondering.
Naturally it is a personal thing, but how do people set the triggers on theor Eblades? Long before foring, long overtravel, nice and loose, short and snappy..what? I was also wondering if a spring might help??
Cheers

 

[Gyroscope]

Light magnetic strength, firing point just at the back of the travel, total travel about 1-2 degrees. Snappy, but easier to pull with gentle taps.

 

[A.B]

Gaz

Initially set mine as short as poss/ bout 1-2 mm pull. gun rocked tho as i found out, it is possible for a picky marshall to make it bounce (so another topic)

i've now got mine set with the firing point approx half a mm into a 4mm pull, this passes millenium tests for bounce.

very snappy at initial trigger pull and returns well, i tried a spring to see if it would assist the trigger return thereby eliminating bounce from recoil- it did the opposite- it made the gun easier to hold at this point i wouldn't reccomend doin this!

for info if you wanna give it a go i used a small light biro spring cut down to about 2mm this was fitted between the rear trigger stop and the frame, by slipping it over the grub screw.

A.B

 

[Skeet]

cheers dudes

 

[jahlad]

ive got mine set with a fairly long pull but with the trigger fireing about 1mm into the pull with about 3mm after, and the magnet on full so it snaps....with my electronics set to arround 26bps it rips and doesnt bounce at all due to the light weight cocking mass i have

 

[Skeet]

Cheers guys, have ahad a fiddle...JAHLAD you have zee mail...soon