Dynasty Shocker Help Wanted!

[Red]

Hey,

When the Shocker's in vision mode with the eye on it won't fire, it just chirps. The hoppers on right, and paint feeds through fine and fires as soon as I turn the vision off, but obviously then I get some chop. Any ideas what's up with it?

Also, taking it apart when I got home one of the ball detents allen fitting burred and now I can't get it out! Anyone know a quick way? Where can I get a new one from and how much are they roughly?

Cheers

Andy

 

[davejeff66]

Heating an allen key (and therefore epanding it) while it is in the head can help to remove buggered screws.

Can't help with the shocker though.

 

[Red]

Nice one fella I'll give it a whirl!

Thanks

 

[Skeet]

So...the eye isnt seeing teh paint...make sure teh eye is clean, if not...yopur eye ribbon might be buggered...

Or...double check that the loom between teh top and bottom boards, is fully plugged in...gently push teh plug home with a small screwdriver GENTLY!!!

If these arent fully home, sometimes the gun will work, but the eye wont

 

[robof9]

another thing is the eye may not be correctly positioned, try it eye out to see if it is working.

if the heating allen key dont work, hole punch it round, carfully.

go to local engineering place to get a spare, they may do em. if not punishers do, or smart parts

 

[scotty187]

turn the vision off fire a few shots and then turn the vision on and try to fire the marker