Dye NT has me stumped.

[GRIMLOCK]

Heyo, Ive been out of the game for a short while and my teching skills are seemingly a little rusty....
my problem is that the marker wont fire, i get a reassuring click from the solenoid so i am hesitant to think its that and air reaches the bleed at the rear of the bolt assembly.
i replaced the o-rings suggested in the manual and the rear spool bumper as a precaution but no result so i am now mostly out of ideas :/
also it has a fresh procell/industrial duracell 9v

 

[Ash - GI Sportz]

Do you have an NT10 or 11? Could be that the dwell is set incorrectly, or that the copper spool-spring needs replacing...

 

[GRIMLOCK]

It's a 10, I'll have a tinker and get back to you

 

[GRIMLOCK]

heya Ash, had a fiddle about. new spring + spool bumpers and rings and a new bolt sail and bolt guide ring for good measure and still wont cycle.... maybe the noid is bust despite the reassuring noise
ill try posting a video later of my end so you can easier diagnose, dwell was tried at both 8 and 12 to no avail also.
cheers - Grimm