Dye DM5 Matrix probs

[diablo user]

just wondered if anyone can help me my mate has a Dye DM5 Matrix and having endless problems with it chopping paint we have tryed loads of diffrent makes he has only used on for outings since new also it it keeps blowing a seal inside but we belive this is due to the pressure being set to hight but he hasent adjusted it from the factory so we turned it down to 280 fbs but still does it every now and again like i said the main prob is it chopping paint its ok it u fire 1 shot slow but soon as u start ripping it it chops spces are

Dye DM5 Matrix

halo b hopper with rib drive

4500 psi air

and everything elese is standard out of the box

tryed new batterys in hopper and gun

if any one any simulare faults or have any ideas plse can u let me know as he has had enough of it.

thanks

 

[Chuck]

Try...

Try changing the bolt tip oring, if this is missing /damaged you can get blow back. wind the LPR all the way in and then back out 5+1/2 or 6 turns.

Also does it have a DYE chip or an after market one?

 

[Jamie B]

beat me to it chuck!

If its not the oring or LPR

Make sure the eyes are clean, and working, (also make sure your eye off maximum rate of fire isn’t set too high) just put your finger in the breech and watch the light.

If those all seem to be good it could be the detents, push them with your finger and make sure they’re not too stiff or stuck out, they could be jammed with shell

If that fails try staring it out to show it whos boss.

 

[Mario]

Originally posted by diablo user
halo b hopper with rib drive

reloader?

check which speed your on

 

[diablo user]

thanx lads will give these a try and let u know.

tred hopper on all speeds funny thing is doesent allways do it at home only when u are in the game must be the adenaling kickeing in or somthing.

 

[diablo user]

regarding the chip it is how it came out of the box not changed any thing. was thinking about getting the virtue chip for it showed my mate the video and he loved the look of it but got to get it firing as it is for now

 

[jeff]

Hi.

If you are still having probelms give DYE a call (0208 649 6330) and arrange to send it in for service and repair.

Thats what they are there for...