Drop forward screws

[uptown]

Hi guys im wondering where can i get screws for a 32 degrees drop forward I have, as i need 2 for the ASA and 2 to attach is to my cocker. Also the ones i have are too big, when i screw them down all the way they don't hold the drop tight to the frame. Is there somewhere i can get them from or should i just go to a diy shop and hope?




here is an example (bottom of the page) if it helps http://www.fatbobspaintball.co.uk/acatalog/32_Degrees_.html

thanks

 

[M1ke]

Any screw witht he right size thread will work mate.

 

[Tom Allen]

Buy a hacksaw and shorten the existing screws.

 

[rayko]

Or get some split washers and use those between the head of the screw and the drop.

However it would help in this case to try and use countersunk screws as the 32 drop I've seen have been carved with countersunk fittings in mind.

Cheers

Ray

 

[uptown]

so i go to the diy shop to measure the thread size? :s

 

[Tom Allen]

The gun mount screws are 10/32 unf (3/16)

I have a couple of countersunk ones if you need them.

I have two lengths, 18mm or 16mm overall.