DM9 question

[stingray]

Hey guys, just brought a dm9 and never had any of the dm series, and advice on what spares to carry what to look out for in kepping it working to its potential and any set up tips, would be greatly appreciated

 

[spangley_special]

Turn your ABS on
Set trigger sensitivity to 1
Set Dwell to 19
Service your bolt kit real well, change the 014 in the top hat and the 017 in the can.
Turn your LPR down until the gun barely cycles and go to chrono.
Check your velocity, if it doesn't shoot give the lpr a 1/4 turn out.
Turn the LPR up 1/4 turn at a time until your velocity stops going up and is consistant.
Every time you adjust the LPR take three clearing shots to make sure the LPR is reset, then chrono.
Once the velocity levels off only use the Hyper reg to adjust velocity.

Now go play, if you don't get first shot drop off all day then you should never touch your LPR again.
If you get some first shot drop off then give the LPR 1/4 turn up.

At this point if your gun ever starts having problems service the bolt kit, don't adjust you LPR.

Hope this helps,
Billy Wing

from the man himself

 

[Silky]

ive not even replaced an oring on my dm9 this year
the standard spares kit will suffice
make sure ya keep the bolt cleaned and lube after each days ball and you should be fine