DM8 - stock settings for HRP/LPR

[Orion3]

I've begun a complete strip/clean/rebuild of an early DM8 and am now in the process of reassembling it....but like an idiot I forgot to note the original LPR/HPR settings.

Can you advise what the stock settings should be..e.g 3.5 turns etc

I can then fine tune at the local field and get it rechronoed - just want to get it close to standard before I start.

Thanks in advance

 

[DYE Euro Tech]

Hi mate,

Wind the LPR all the way in, then back out 3 1/2 turns. The HPR is more try 5 then get it to a chrony.

Also make sure your dwell is set on 18.

I advise getting a reg tester, priceless bits of kit. - https://shop.dyepaintball.com/en_pounds/hard-parts/reg-tester.html

You will be able to pick one up from your local dealer.

Rich

 

[Orion3]

Thanks Rich