DM7 Trigger Settings

[jknight15]

Does anyone know the settings of a DM7 trigger when they are brand new?

Just grabbed a cheap DM7 and the trigger settings are a little messed up so I want to know if anyone who is either a tech or from Dye can tell me the settings the trigger screws are put at when they are first made.

Cheers.

 

[J@mes]

DM triggers are very easy to set.

Just screw in each of the adjustment screws for post and pre travel (just set it so the activation point is centre). The screw in the trigger is the spring tension. out weaker, in stronger

Everybody plays with the trigger when they get a gun, so dont be bothered so much

-james

 

[jknight15]

Cheers J@mes

Reason I'm trying to get it back to stock is it came to me set to someone elses preferences and I'm trying to get it back to stock settings so I can work my way from there

 

[Cro]

Screw the front 2 on the grip till they are flush with the grip frame and the one in the trigger till it's flush at the back of the trigger. That's not a stock setting but a good place to start from as you know exactly where to go back to if you don't like what you've done.

 

[spangley_special]

i'd recomend a 'lil piece of electrical tape over where the sping sits inside the frame, as if you adjust your trigger a lot it has a tendancy to pop out otherwise

 

[jknight15]

i'd recomend a 'lil piece of electrical tape over where the sping sits inside the frame, as if you adjust your trigger a lot it has a tendancy to pop out otherwise

I have noticed that when I opened up the frame to have a look at the microswitch while adjusting the trigger.

Hope thats not a threat to frying the board if its conductive