DM6... hungry bugger.

[manners87]

love the thing but still it does munch up air fairly quickly. dm6 efficiency mods? owt or nowt? could do with brining down the hungryness of my dm6? is there anything on the market at the moment or any tips on how to bring the consumption down whilst maintaining the small range of velocity?

 

[Sabot]

Get a bigger bottle

Nah, i actually dont know if there is any mods..there probely is..

 

[Gran]

What do you have it set at?

LPR?
Dwell? etc

 

[J@mes]

dont be a fool paul, my DM4 loves to munch, but i was still getting 650 + hopper off it. why do you need to be more efficant?

-james

 

[Polly]

DM6 pfft. just get an ego. I am.














If this blatant cheekyness changes your mind about selling then i will edit accordingly

 

[manners87]

hehe. cheeky runt. and i dont know what settings it on. havent fiddled cause i know ill break it .

any recommended settings for cold, medium and hot weather?

 

[Owen.T]

tophat mod? you can get the tophat mod Orings from planet and luckey.

 

[Lucky_Tech]

http://www.luckyeurope.co.uk/catalog/product_info.php?cPath=23&products_id=46


three rings on your top hat dwell if 14 and lpr at about 3 turns and you will be good to go.

 

[Big Mac]

go to talkpaintball.com and sign up there - a board is run by dye themselves so if you need any techy help visit them!

 

[Ash - GI Sportz]

What kind of efficiency are you currently getting?

Check the tension in the bolt o-rings, especially the front and rear 017 UR90 o-rings and the 015 BN70 bolt sail o-ring. If there is too much tension there you will be wasting air by over compensating with your LPR or dwell settings.

You can also increase your dwell by a couple of increments, this will allow you to run your LPR slightly lower.

Also, check that you are maintaining a good paint/barrel match, shooting small paint through a .695 back will consume more air in order maintain decent velocity.

Ash
Tech department
DYE Europe