DM4 problems

[shifty26]

Hey i need some help i got some problems with my DM4.

Ok its leakin from the trigger i think its 1 of the o-rings in the LPR but i have been told not 2 muck about in that area any ideas. Also, i think it is because of the leak though, every now and again it fires a weak shot and the ball only goes half way down the barrel so the next shot it fires hits the paintball already in the barrel and it causes lots of problems.

 

[Skeet]

Take the grip frame off, leave the inline etc conected and gas it up, with the on off/open...see where the leak is coming from...then turn the on/off (at teh front of teh gun) off..if it still leaks its teh on/off o ring...could be leaking from the solenoid, so may have blow teh gasket or teh screws are loose...dont tighten them too much

 

[Fly]

First of all have a lookHere
If you cant fix it mate send it my way and I'll sort it for you

 

[hyper1]

Leaking from the trigger region can be caused from several area's. First change the #015 bolt sail o-ring (most common reason). If leak persist, then change the LPR o-rings. If still present, then change the on/off o-rings.

FSDO:
1. Need new battery,
2. LPR set too low.
3. Dwell set to low/high.
4. ABS is off/set to low.
5. Too much/not enough or poor quality lube.
6. Swollen bolt o-rings.