Dm10 air use

[platoongod]

Hi guys

So i took my dm10 out the other day to try and get it shooting closer to 300 consistantly, i followed some guides on using the lpr, and got the gun shooting fairly good, how ever i used a tank which had 2500psi in 1 and a half hopper, so around 300 balls and 2500psi was gone, this cant be right? any ideas?

Ash

 

[platoongod]

Got training tomorrow evening, if anyone has any ideas it would be appreciated.

 

[Mayhem-Ginge]

what was it shooting per bottle before you played with the lpr ? im shooting a dm10 pga n getting just under 1000 balls per 3k fill

 

[soul snatcher24]

is the gun freshly lubed and was it before you adjusted the LPR?

what is your dwell set at?

does the gun seem to be shooting any differently to normal? (louder, more kick etc.)

 

[spangley_special]

Turn your ABS on
Set trigger sensitivity to 1
Set Dwell to 19
Service your bolt kit real well, change the 014 in the top hat and the 017 in the can.
Turn your LPR down until the gun barely cycles and go to chrono.
Check your velocity, if it doesn't shoot give the lpr a 1/4 turn out.
Turn the LPR up 1/4 turn at a time until your velocity stops going up and is consistant.
Every time you adjust the LPR take three clearing shots to make sure the LPR is reset, then chrono.
Once the velocity levels off only use the Hyper reg to adjust velocity.

Now go play, if you don't get first shot drop off all day then you should never touch your LPR again.
If you get some first shot drop off then give the LPR 1/4 turn up.

At this point if your gun ever starts having problems service the bolt kit, don't adjust you LPR.

Hope this helps

 

[platoongod]

Thanks jack will try this tomorrow, before hand i was getting maybe 800 per 3k fill, now its barely a hopper and yes louder and more kick - Also my green light when ball is in chamber constantly flahses and doesnt shoot thr right bps, but when i turn eyes of it shoots the correct bps, flashing green light?? what does that mean?