DC2 Cocker..drop off!

[thekid]

Ok ppl?
i was wondering how i can stop my old but fast DC2 Having drop off at high rates of fire... When i reach or even go above say 18 bps the "String of paint" seem to suffer from Drop off and i can see the paint balls falling Short,other that Slowing the Marker down how can i stop this??

If it helps ive be playing with the Little reg next to the Barrel!

Dale

 

[WingNut]

Which AIR system are you using???

 

[thekid]

Hello Wingnut,long time no speak.....

I have used a few Air systems,i have and both seem to do the Same!( pmi and Pure Energy)

Could i be out shooting the Marker??

I seem to remember this marker showing around 22bps last time this Happened!

Dale

 

[Sid Sidgwick]

Sounds like the reg cant re-charge quick enough to the required pressure. Take the reg off the marker, clean it and try again, if that don't work try a different reg on the gun and all should be well.

 

[Hawkins]

Seen this loads of times...

Open the Grip turn the marker on hold the red button and go into timing, in there youll see COFF if its too little youll get drop off at high speeds raise it 5 and shoot. If its not enough you should hear it dropping off, if it does raise it a bit more untill it doesnt...

The little reg next the barrel is the Lpr and is resonsible for recocking the gun, if its too low it just wouldnt recock and wouldnt even fire... So if the marker is still being cocked at high speeds then its ok. One thing to look for though is to see if the back block still moves at the same speed as a single shot and is moving all tha way back at high rates, if this is the case it cant refresh fast enough so raising the reg a little bit will solve it...

Pritty sure that'll solve it, but if it doesnt then tell me and ill get the thinking cap out !

 

[Thib]

Tried new batteries ?
Else: you may have not enough pressure at LPR:
How to set pressure:
Set very few pressure and improve pressure until gun shoot correctly when you shot straight the floor (barrel down), then add 1/2 turn. (With some kind of ram with qevs, you can just add 1/4 turn).

Please ask a guy who know cocker to fix it if needed, don't set everything wrong.

 

[thekid]

Seen this loads of times...

Open the Grip turn the marker on hold the red button and go into timing, in there youll see COFF if its too little youll get drop off at high speeds raise it 5 and shoot. If its not enough you should hear it dropping off, if it does raise it a bit more untill it doesnt...

The little reg next the barrel is the Lpr and is resonsible for recocking the gun, if its too low it just wouldnt recock and wouldnt even fire... So if the marker is still being cocked at high speeds then its ok. One thing to look for though is to see if the back block still moves at the same speed as a single shot and is moving all tha way back at high rates, if this is the case it cant refresh fast enough so raising the reg a little bit will solve it...

Pritty sure that'll solve it, but if it doesnt then tell me and ill get the thinking cap out !

Cheers for the Info ,I seem to remember changing the COFF values when making my final adjustments!!...Do u know at which point the Marker stops "working" and starts to drop off!??

The reason i played with these setting is when i had this sent from the USA it had some customs settings and i lost them and now for the Life of me i cant find any Settings for this marker!...Never ever sell your prized marker!!

Dale

 

[Hawkins]

Unfortunatly Every marker is different on the settings, generally lowering everything and having the eyes off makes them shoot faster..

I Have mq2 so all my settings will be completly different to yours

moody did have a beautifull site telling yu how to tune an eblade but alas its no more..

setting the marker to factory fast usually does the trick, but even then you may have to raise the Coff. . .

Personally dont like the DC2's or any nexus or eclipse cockers as they look too nice to hack up.. and what I do to cockers would make a fanatic cry

Hope its working now, if you ever have any probs with it shoot me a pm ^

 

[thekid]

Unfortunatly Every marker is different on the settings, generally lowering everything and having the eyes off makes them shoot faster..

I Have mq2 so all my settings will be completly different to yours

moody did have a beautifull site telling yu how to tune an eblade but alas its no more..

setting the marker to factory fast usually does the trick, but even then you may have to raise the Coff. . .

Personally dont like the DC2's or any nexus or eclipse cockers as they look too nice to hack up.. and what I do to cockers would make a fanatic cry

Hope its working now, if you ever have any probs with it shoot me a pm ^

Thanks very much..... i shall try and play with this and see where it leads!

Dale

 

[Lucky]

If you fancy some reading, this may help.

E-blade Tweaking

Intermediate Tuning