Quick Q: is it normal for air to leak from the fill nipple (not the base, from the hole) when the bottle is almost empty?
pressure was enough to pop off fill nipple protector
and would low psi also cause macro not to seal and a leak come from the vert reg elbow? (from the coller not the base)
was all fine then rescrewed tank to asa in with only a little psi and these two leaks popped up
always noticed in the past as I screw in air system as the air flow first starts theres a slight leak from elbow until I screw it in more
I'm realllly hoping this is all because my tank was nearly empty
pressure was enough to pop off fill nipple protector
and would low psi also cause macro not to seal and a leak come from the vert reg elbow? (from the coller not the base)
was all fine then rescrewed tank to asa in with only a little psi and these two leaks popped up
always noticed in the past as I screw in air system as the air flow first starts theres a slight leak from elbow until I screw it in more
I'm realllly hoping this is all because my tank was nearly empty
