Function and Design:
Eye is digitally sampled with a 10-bit Analog to Digital converter. No more "on/off", the Cheetah can detect the tiniest bump in voltage, allowing it to detect the darkest/clearest paint. This is done automatically and does not require you to fiddle with a potentiometer.
Eye can actually SEE THE PAINT MOVE with its ADC and uses that information to refine its feeding levels to match your guns firing pattern exactly. No overdriving. No broken paint.
Advanced motor-control circuitry can turn the motor on full speed if your gun shoots that fast, ever hooked your battery up directly to the motor? Yeah we can go that fast. This board can handle roughly 6 times the current draw of a Halo, you'll never burn it out.
Precise digital speed control on the motor, from a crawl to 38 bps and all speeds in between, the Cheetah watches your gun, and feeds it as fast as it can fire, but no faster.
Precise current sense allows near instantaneous detection of motor slowdown and stall conditions, we won't break your paint.
Current sense also allows the Cheetah to keep the spring just barely wound, we keep a little pressure on the ball stack at all times without shooting balls past weak detents.
Advanced anti-jam detection and clearing. The Cheetah can reverse the motor at FULL SPEED to unwind the spring and clear a jam in less than a second once detected.
No special drive cones, no lubricated belts, its all in the board and hands-free, you just fire.
"Chameleon" LED tells you exact loader state, battery level, and status.
Battery use is optimized, when this board is off its really off, and won't drain your cells when not running. Even when its on, the board 'sleeps' when not feeding to be sure the power is there when you need it.
Turn loader on with a 2 second push and hold of the front button.
Turn loader off with a 3 second push and hold of the button. All lights will turn off when the Cheetah is no longer active.
The Cheetah will timeout after 20 minutes of non use