i have just got myself a 03 factory cocker with full nexus upgrade and wondered what output psi to run it at as i have an angel air system and was not sure of the output psi any help much appreciated thanks
cocker psi
- Thread starter gingerinferno
- Start date
it will work at that, but if you want to set/fire it fast you will starve the gun.Originally posted by Graham-DV8
Between 500-550 from your angel reg m8
run 750-800 and you will have no problems.
DB
does that go for all reg > cocker combo's??
i'm running my '04 blade at about 480psi output from the reg... and it seams to shoot well enough...
i'm running my '04 blade at about 480psi output from the reg... and it seams to shoot well enough...
T
Tommy Gun-Nexus
Guest
550 psi works for me. I dont get any shootdown atall
Spose it can also depend on how high-flow your Regs are....
TG
Spose it can also depend on how high-flow your Regs are....
TG
was being kinda general, as his "03 factory" could have several diff set-ups or may be a pro series ect.
input depends on how fast you actualy fire the gun ( if you only have it on factory fast then you'd have trouble starving the gun, i'm talking for high BPS ) , what the LPR is set to and the flow of the air syatem and inline reg.
best bet is set it high and you wont have any probs.
ok cool ta.. its one of them things thats kinda assumed everywhere.. but no-one really says anything
T
Tommy Gun-Nexus
Guest
Nexus run there gats at 550-600psi, and that works fine for us. I would only suggest turning you imput up higher if you are getting drop off during long strings of fire.
If your not, then i wouldnt bother dude
TG
If your not, then i wouldnt bother dude
TG