Cocker project

[Parksy]

Okay am about to venture in to the world of pump markers!

I have aquired a body/reg etc to start my marker off (see attached pic). So as far as I can see I need to aquire a frame and pump kit, asa and barrel to have a working gat.

I like the look of the CCM gear, and it seems to have really nice reviews so think I am going to go down that route.

I have looked on the CCM ebay store and spotted these two things. Are they suitable for the body I have aquired?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280632122567&ru=http://shop.ebay.com:80/?_from=R40&_trksid=p5197.m570.l1313&_nkw=280632122567&_sacat=See-All-Categories&_fvi=1&_rdc=1

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150565456769&ru=http://shop.ebay.com:80/?_from=R40&_trksid=m570&_nkw=150565456769&_fvi=1&_rdc=1

Any help/advice appreciated

 

[Gee Tee]

Dave, Both those will work fine. I've got a similar set-up on the silver/green pump in this picture, but that's an earlier Eclipse body and needed a 99 spec pump kit. Mine also has CCM's slam fire kit. I bought the kit from CCM direct, and they are great to deal with - no issues with shipping to UK

By the way - if you buy frame and pump kit together it usually works out cheaper

 

[Rat]

have alook at the thread pump time or others in the pump area, plenty of advice there!

 

[Stencil]

You could get an autotrigger kit as well, if it interests you.

http://cgi.ebay.com/CCM-2K-Kit-w-45-Pol-Black-Black-7B0005-2KB-/280631798963?pt=LH_DefaultDomain_0&hash=item4156f56cb3

 

[Gee Tee]

The combined pump/AT kits do work out cheaper - that's how I bought mine from CCM

You should save on shipping too

 

[Parksy]

So I am right in thinking I need the 2k/2k+ bits for that body type?

I have spoken via email to the guys at CCM Gary and they have been nothing but helpful, and $11 shipping can't be bad!

Your green and silver looks very smart indeed!

I don't fancy an autotrigger if my understanding of them is correct? Basically it fires a shot for every pump pull without having to pull the trigger?

The combo frames and pump kits are normally cheaper but they have got 10% discount on seperate frames and pump kits which work out cheaper atm

 

[Gee Tee]

To be 100% sure check out the front blocks bolt thread size. If it's just over 1/2" it's a 2K+ body, but smaller threads around 3/8" will be pre 99 spec. As for A/T kits.. they only shoot on closing the pump action if trigger is held in, hence the description of slam fire. If you fire normally by cocking the pump for single shots, the marker will only fire if you pull the trigger. I don't really shoot mine on slam very much, but it's handy for keeping heads down in panic mode.

 

[Parksy]

Ah! Then AT sounds a bit more interesting then in that case

The difference just seems to be a connector between the trigger and cocking rod by the looks of things? So am guessing the rod for the AT kit is threaded in some way then.

I have become bored of Sup air and spraying tons of paint so am going to have a blast at pump at walkons or scenarios, both of which are new to me

 

[Gee Tee]

Yes pump rod is drilled and threaded for a pin that engages in the trigger cam arm

welcome to the world of pumping

 

[Parksy]

Quick question for you Gary if you don't mind

How does the CCM frame compare to the normal WGP slider frame? Worth the $30 difference in price?

Also has anyone tried the CCM EZ grip pump handle. Looks nice!