cocker problems

[CAMPBELL]

during training the other day i noticed that my cocker was kind of 'spluttering' and that every time i pulled the trigger it cocked but no air came out, i changed the battery and still the same happened and body know what up with it ???


cheers
campbell

 

[Demonic]

check to see if your bolt is the right way up, there should be a hole approx 9mm in size on one side. Make sure thats at the bottom.

 

[Scars]

nah its not that it was working fine one minute then not the next

 

[dr.strangelove]

Sear lug probably slipped.

 

[Mikey D]

yeah either the sear lug or the cocking rod has unscrewed.
screw in the cocking rod if its that.
sear lug, find the right allen key (dont know it off my head) put it in the top of the body and turn (anti clockwise i think), fire, turn again if needed until you dont get the farting noise.

if its not that, input pressure might be wrong or cocking reg set too low

 

[CAMPBELL]

thanks gents

 

[jahlad]

tis quite likely the hammer lug as mentioned before....there are a few ways of stopping it happening again tho.....let me know what sort of hammer you have and ill let you knoow how to lock it in place