Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Cocker Problems.....help!

Brice112

New Member
Aug 13, 2001
1
0
0
Visit site
the back block on my 2k cocker sometimes gets stuck whem im firing and i have to press the trigger back a few times again to get it back forward. I think that its my trigger thats the problem cause sometimes my trigger doesn't come all the way forward (only like a millimeter off.)

Can someone give me some problems that occur that make my back block get stuck.
 

Mark

UK Cougars
Jul 9, 2001
1,403
0
0
England
www.ukcougars.co.uk
if the marker is firing ie a gas burst goes down the barrel when the block is back but then doesn't return the 3 way rod is incorrectly adjusted
the lug on the hammer set could also be too far down making it catch on the sear mine moved some time ago and it was 180 degrees out firing on the release of the trigger but the 3 way is the most likely source of the trouble...if the trigger plate is a round hole instead of the older slot style it does point to that kind of problem
also if you have a grub screw adjustment for the trigger to stop the up and down movement this could be binding on the trigger stopping it from returning to the furthest point forward and the same goes for any other grub screws you may have on the trigger making the trigger bind...................just a few things for you to check, hope this helps.
 

Paco

dismember
Jul 26, 2001
24
0
0
stuck in S. Georgia
Visit site
also...

It could be your trigger return spring. If it is too weak or worn it will cause exactly what you have just described. Each time you pull the trigger it may stick or return (closing the bolt) slowly, which can lead to a lot of chopped paint. I would try this first cause it doesn't require changing the timing of the gun. The return spring is the spring inside the grip behind the trigger plate.
 

Paco

dismember
Jul 26, 2001
24
0
0
stuck in S. Georgia
Visit site
oh yeah,

sorry, forgot...
it could alsoi be one or more O rings inside your 3 way. If they are swollen, cut, nicked, dirty or damaged in any way this can also stick your gun in the open position. try these and Mark's suggestions. If none of these do it let us know.