Cocker inline reg problem (Black Magic)

[MarkehB]

Ok, i've eventually managed to get the top of the reg off. Inside is basically a brass plate with a hole in the middle. The o-ring that sits on the top is fine, and the o-ring on the brass thing in the bottom of the reg that adjust pressure is fine. But its still leaks outta the little hole in the side.

Is it possible to get the brass plate and etc out? I've tried a bit but dont wanna damage anything.

Any tips?

Ta

 

[Beaker]

well, if that's not it then I can only suggest calling or mailing Belsales or Planet.

 

[MarkehB]

M8, got the thing apart and cleaned it all out, just wondering if you screw the lug in the bottom further in does it increase or decrease pressure?

Ta

 

[Beaker]

From memory the Ergo is "normal" so screwing the nut in (clockwise) increases the pressure.

 

[MarkehB]

ta thats what i thought, wasn't sure tho, the guage on the gun is screwed which is making my life tricky :0

I cleaned evrything it still leaks tho, but not as bad