Cocker Customisation query.

[Slim Clan]

http://www.p8ntballer-forums.com/vb/showthread.php?s=&threadid=13839

Ok anyone who knows exactly what this is, ( not talking about the milling just want to know the type of bolt, modifications ect.)

What sort of size bolt does this take and how does it cock?

Also if anyone has a set of sizes and metal work instructions. I would really appreciate that too.

Thanks a load.

Slim

 

[Equus]

Have you got a working version of that link?

 

[Slim Clan]

Try this.....

http://www.p8ntballer-forums.com/vb/showthread.php?s=&threadid=13839

Its the links in this thread

 

[DangerousBrian]

looks like a 1/2 block like racegun do, the "backblock" is now just behind the feed tube

cocks the same as any other cocker, with the ram at the front and rod running down the side

 

[Slim Clan]

Yeah but isn't the back block connected to the bolt and kind og connected to the cocking rod?

If you look the bolts brought all the way forward and theres no way the back block can come back far enough for it to cock the gun.

hows it work?.........need to take it apart.....must.... get..... spanner...

 

[DangerousBrian]

if you look the bolt pin goes in the top of the bolt. this then goes intho a slot in the hammer

hammer slot is open at the front and when gun cocks pin goes in slot and cocks hammer, them when bolt goes forward the pin comes out of the slot and leaves the hammer behind.

similar to A pmi3 or summin

 

[Slim Clan]

So you don't need a cocking rod or a beaver tail?

Would it make a difference to the cycle speed or is it really just a fancy gubbins.

Slim

 

[DangerousBrian]

Originally posted by Slim KW
So you don't need a cocking rod or a beaver tail?

Would it make a difference to the cycle speed or is it really just a fancy gubbins.

Slim

thats right,m u dont need either.


if you have a lighter bolt and pump rod (coz they well shorter) then in therory depending on your setup the gun can re-cock faster, but u usualy wont notice unless u got a Race or E-Blade.

it is quite a drasticmod, unless you well skilled with a mill i wouldnt even think about it

 

[Slim Clan]

Im not skilled with a mill at all......never even used one. I just draw up the working drawings and work out the dimensions, cutting templates and send it to the metal workers.

Lol

Talking about dimensions anyone have any for that particular peice of work?