Cleaning and lubing your gun!

[SantaCruzScotty]

So my Ego9 is shooting around 250 - 290 (PSI?)
and have been told to clean the gun.

I'm not new to the sport but not good with guns or anything a long the lines of that!
So I was wondering if anyone could give me hints or tips and other new people of the sport a guide of what to clean and lube and what to leave. Obvious one for me is do not lube any part of the air tank.

Please post up your thoughts and guides to what you do after a training session or tournament.


Cheers

Zebs!

 

[Ali]

take the bolt out, give that a good wipe down and put abit of eclipse oil on that, take the rammer bolt out, clean down well and add some oil on to the orings
take the eye covers off, take the detents out give those a clean and the eyes
take apart the LPR and the HPR, wipe those down, add some vasilene ( spelling? ) onto the orings and re-assemble

 

[mikepetrs]

after a training session i do all of the above apart from the LPR & HPR if all is running smoothly,
generally after a tourny i take the whole gun apart, (apart from anything connected to the low pressure hosing, as i generally find when i take that off i need to make a new bit (i.e coming from the solenoid), its all prity simple, just be methodical, do you have the manual ?
as said above, gun oil on bolt and rammer, not grease
EDIT. do you mean FPS not PSI?

 

[J O K E R]

http://files.planeteclipseb2b.com/manuals/ego/EGO9-MANUAL-EN.pdf

Page 54 onward

 

[SantaCruzScotty]

Thanks guys, but this isnt just for me, just in genral, to help the hopeless people like me

Again, thank you all!