changing the firing mode on a blackheart board.

[evoonline]

would it reset the rof, dwell etc. not sure why it would but ya never know.

 

[balf]

no it wouldn't

 

[evoonline]

cheers balf.

also my other shocker, gauge on reg reads 200 when sitting, when pulling trigger slowly it goes to 170ish, when pulling quickly it drops to 100 and makes a wierd hissing noise from the bottle reg / oops area. could it be the dwell needs turning up ? it has the stock sp 1/2 turn on/off oops.

 

[balf]

cheers balf.

also my other shocker, gauge on reg reads 200 when sitting, when pulling trigger slowly it goes to 170ish, when pulling quickly it drops to 100 and makes a wierd hissing noise from the bottle reg / oops area. could it be the dwell needs turning up ? it has the stock sp 1/2 turn on/off oops.

Make sure the tank is in all the way, the SP on/off suck ass for it, they are generally about a half to full turn out, you have to really work to get it on(try a different oops should you have one) as for the hiss my guess is the reg needs a clean and regrease, theres not much to leak in there but if there is some debris it will let air seep out on occaision, also check its not the macro fittings that just need re-installing

 

[evoonline]

hmmm i dont have another oops but im hoping smart parts or warped will have one at the PA.

back to changing firing modes. it was set to ramp i.e. 12bps for PA xball but seeing as im playin 5man semi 12bps i need it semi. now ive followed the destructions and set it to mode 1 in the firing modes which should chirp once? ive followed the instructions exactly and its still chirping 4 times which is rebound? .. why wont it set to mode 1?

 

[evoonline]

nevermind... im an ass!!! i was changing UP rather than DOWN. took me this amount of time to realise that 1 is DOWN compared to 4 and not UP . sorted now

 

[Aza0193]

evo evo evo, what ever shall we do with you