Changing output pressure on an Angel A.I.R

[Skullpop]

What would i do without this forum?

I'm using a Angel LCD, and i need this angel A.I.R regulator to put out a high pressure, and at the moment it says 'Lo-P' on 'Output PSI'.

If i allen key off the front panel, what do i need to press/crank/churn?

Thanks.

 

[dan0011]

currently you have it under 100psi (or something like that) just crank it up clockwise....or anticlockwise sorry i forgot untill it starts reading numbers instead of lo P

rember to fire a couple of shots each time so it can recalibrate

 

[dan0011]

yep increase is clockwise, just checked, it should say on your angel air - see those letters and arrows printed into the diler? should give you a hint

 

[Skullpop]

Originally posted by dan0011
just crank it up clockwise

Heh.. I'll crank it now. Thanks!

EDIT:
I'm lost. I've got the cover off, now what do i crank?

 

[dan0011]

the diler its a little screw at the front of the reg use your allen key.

 

[Skullpop]

I'm twiddling it all the way in, and all the way out, and nothing's changing on the 'output PSI' screen, it's still saying 'LO-P'..

Wait, did i mention that i have NO GAS IN THE BOTTLE?
Tell me that doesn't matter. Whoops otherwise.. I thought it was all electronic!

 

[chrismrgn]

Is your bottle full of air?

Cos i dont think i can change it unless it is, not sure tho, this coming from the guy that had his reg for 2days an broke it

 

[dan0011]

yes you need air in your bottle

 

[Skullpop]

Hehe.. No gas in the bottle. That will explain it, i think.. I thought it was ALL electronic!

 

[dan0011]

it is electronic
do you have the manual?
the regulator is a normal regulator will an LCD display