my brother and a friend both have impulses but dont want to switch guns.. my brother wants my friend's vertical maxflo and my friend wants my brothers normal maxflo, how would they go about making the swap?
changing maxflo?
- Thread starter iplaymindgames
- Start date
You will need some tools..then you take the VERT MaxFlow off of one marker...then, you remove the OTHER MaxFlow, from that marker...then, and this is important, you carefully exchange the regs, between hands.
Then, you put the vert maxflow on the new marker, and the horizontal maxflow on the other marker.
Et voila...
Then, you put the vert maxflow on the new marker, and the horizontal maxflow on the other marker.
Et voila...
i was mainly referring to the removal of the maxflo on the non-vert because its not unscrewing like the vert 
If so..make sure bottle is empty and remove it.
Then turn marker over...undo 4 allen bolts, remove and remove plate...reg then pulls out strsight up, you will notice something like a fill nipple on th ereg which goes in the oring in th emanifold (main bit on gun with on/off on it)...the manifold comes off by releasing the screws on th eside of the rail..then it slides out, then rail is held on like a bottom line by two allen bolts.
Then turn marker over...undo 4 allen bolts, remove and remove plate...reg then pulls out strsight up, you will notice something like a fill nipple on th ereg which goes in the oring in th emanifold (main bit on gun with on/off on it)...the manifold comes off by releasing the screws on th eside of the rail..then it slides out, then rail is held on like a bottom line by two allen bolts.
Eh? Why does he need to remove the reg from the manifold Skeet?
Can't he just go straight to the bit where you undo the 5 smaller allen screws and slide out the reg, then undo and remove the rail from the bottom of the grip?
Can't he just go straight to the bit where you undo the 5 smaller allen screws and slide out the reg, then undo and remove the rail from the bottom of the grip?
He sasid hes trying to remove the reg "as its not unscrewing" thought id give him all the info...and it seemed pretty obvious to me about the other bit!