Capping

[One Crazy Mofo]

Recently got a superhero speed 05 then the team decided we're going in the masters 7 man which I beleive is capped at 15bps. My question is this according the manual you can't change the MROF on a speed 05 it fires as quick as you can feed/trigger pull so how I am going to cap my marker for the masters? Do I need a software upgrade?

 

[Bob]

I' sure there is a way, my mates A4 you can cap. The spitfires guys (John C and Tom allen) will know but i'm sure some one eill set you straight

 

[seany boy]

Open the left grip panel and press the inside button twice, then pull the trigger: bottom light only is 15bps capped, next one is +3bps, next one is +3bps, and so on untill when the top one is lit it is ramping

 

[haz]

erm, no you press it 3/4 times to get past the three settings (trigger offset, dwell, hopper) then after these three the top (big) LED will flash multicoloured through red, green and orange. Now what seanyboy said applies, bottom led lit is 15 capped, and for each trigger pull after you light the next small led and add 3bps to the cap.

 

[One Crazy Mofo]

Cheers guys will have a go with it today.

Anyone know how they're planning on monitoring it?

 

[Kill Crazy]

ye they are planning on getting radars in to check the guns in play plus the marshalls will be checking guns personaly for ramping trigger bounce etc and the are sharp on this.

so remember keep ur gat on tr1 and 15bps

 

[Shades]

There was rumour that the same type of robot used at NPPL events may be used.

You cannot cheat against one of these.