Can't stop Shocker bouncing

[IL-Tom]

Ok, I've just put a Blackheart board and a New Designz trigger in my SFT Shocker and the damn thing won't stop bouncing.

I've got the debounce turned all the way up to the higest setting but it seems to make no difference. Given that this is the first Shocker I've owned and I've not used it much as it's still work in progress I'm sure there's something simple that I'm missing. Any ideas anybody?

 

[crazy-lacey]

Ok, I've just put a Blackheart board and a New Designz trigger in my SFT Shocker and the damn thing won't stop bouncing.

I've got the debounce turned all the way up to the higest setting but it seems to make no difference. Given that this is the first Shocker I've owned and I've not used it much as it's still work in progress I'm sure there's something simple that I'm missing. Any ideas anybody?

have u tryed looking at http://www.zdspb.com/tech/index.html

it is the holy grail for shockers and yes it has infomation about upgrade boards also im guessing you have looked through the manual.

 

[Ahdinko]

I think you can turn the magnet strength up from inside the gripframe, meaning you'll have to detach it from the body.
Also if your trigger is sitting right on the activation point, then back it away a little through the screws on the outside of the trigger.

Ahh, NDZ triggers are a bit different, found this on zdspb

Please note that aftermarket NDZ triggers allow for limited magnet adjustment without removal of the board. This is accomplished using a 3/32" allen wrench into the trigger magnet cage located above the post-travel screw in the face of the trigger. The cage can be adjusted by a small amount in either direction, but once you reach the limit you'll have to remove the board and adjust the frame magnet.

 

[Skeet]

Remove the magnet completely and rely on the microswitch...bend the leaf on the switch if required...much much nicer.
​

 

[Lump]

Remove the magnet completely and rely on the microswitch...bend the leaf on the switch if required...much much nicer.
​

what he said

 

[Skeet]

what he said

See...Lump agrees and he has had more guns than I have had hot dinners...hell, he has probably had more Shockers, than I have had hot dinners!!

As much as I don't like SP gear, I do like Shockers...and I can shoot them very, very fast...I can shoot a Shocker fast, much more easily than I can my Ego and the one I built didnt bounce either

 

[Lump]

yes i love my shocker to my most fav gun ever

 

[eastie]

Leave it bouncing, way more fun that way

Not that id know of course...

 

[IL-Tom]

Ok, call me a dunce but I didn't notice a magnet. What should I be looking for? Please bear in mind that Smartparts had run out of boxed boards at campaign so I didn't get a manual and am just going on what I've been able to find online so far.

 

[crazy-lacey]

Ok, call me a dunce but I didn't notice a magnet. What should I be looking for? Please bear in mind that Smartparts had run out of boxed boards at campaign so I didn't get a manual and am just going on what I've been able to find online so far.

have you tryed goin to blackheart website and see if they have a manual you could download>