Bt tm15

[hkg_striker_force]

When playing woodsball my BT TM15 comes out to play, but recently its not firing correctly, the paint seems to get stuck in the barrel. Having looked at the gauge it sits on 200psi fires fine, but when i get hire rates of fire the gauge seems to drop to almost nothing and then recharges back to 200psi.

Using a remote line, and a low pressure bottle, some one tell me whats wrong please?

 

[Thib]

Low pressure bottle may be the problem.
Or the bottom line not god enough.

Can you try with a HP bottle ?
And with your bottle and no remote line ?

 

[chuckwood]

On Uk Scenario they have talked about this too, ususally seems to be the remote hose not handling rapid fire.

 

[d rabe]

it will more than likely because you are using a low pressure bottle and a remote line...if you ask the question on ukscenario then you will get more input mate....

and for my pain i actually play for team ronin who are now bt rangers ronin...so have used these markers a few times

 

[Andygoth]

Shouldn't be a low pressure bottle problem. I used a remote line and a low pressure bottle on my TM7 and that would handle 20 BPS full auto fine. The TM15 is still mostly a mini on the inside the same as the TM7.

Try putting the bottle straight onto ther gun and see if that makes a difference, some hoses can be restrictive. We used extreme rage hoses with slide checks.

 

[Teddy picker99]

I found the standard barrel was cat poo, balls getn stuck quite alot, changed barrel and never broke since. Iv never noticed dodgy pressure though
X

 

[MeDiC]

How far do you turn the remote ASA on/off ?

Sometimes the pin inside the on/off pushes too far on the valve pin of the tank if on all the way. Back it off a half turn and see if that makes any difference.

I'm guessing you don't see the problem without the remote line ?

*Edit* Just noticed this thread is over a year old. I'm sure the problem's sorted by now...

 

[hellboy666]

i thinkin a block in remote or asa