Black heart board problems!

[yimkin101]

basicaly i bought a second hand smart parts ion with a black heart board and it is stuck on full auto ive tried everything to get it off but to no sucess ive looked all over google for a solution but there only two instances of this happening will i have to buy a new board or is there a solution?? (by the way ive aksed everybody at my local field to see if they can program it no one knows how!!!)

 

[MeDiC]

Take the grip off, dis-connect the battery.

Hold down the trigger and re-connect the battery, come back and tell us what colour the power LED lights up...

 

[Big Mac]

Have you adjusted the trigger recently?? Also turn up your debounce

Check ZSDPB - it is the bible for all things smart parts and register on PBnation. It's a horrible horrible site but full of very very knowledgeable people.

 

[NitroBall]

http://www.zdspb.com/tech/mguide/ion/adj_electronics_bh.html

 

[yimkin101]

Im at boarding school for now ill check my ion on the weekend hopefully ill get some more progress

 

[NinjaUK]

the "taking the battery out, holding down the trigger and touching the battery to the connectors" is a good idea

that determines whether the gun is locked or not

like on my GoG Extcy, when you take the battery off, hold trigger down then touch the battery to the connectors if it shows a "green light" this means the marker is locked, if you tap the battery to the connectors again it flashed red, this means the gun is no UNlocked... let us know how you get on

 

[Richiemonk]

BTW....Blackheart boards Cannot go down to 10.5 bps, so i hope ur using it on semi

 

[spangley_special]

BTW....Blackheart boards Cannot go down to 10.5 bps, so i hope ur using it on semi

Actually you're wrong.

Both stock ion board and blackheart boards can be capped using the recharge value.

If you wish to "cap" the marker at any particular speed, you will have to use a calculator and punch in the numbers yourself. This is the formula.
[ (DwellBlinks/2) + 33 - (1000/DesiredROF) ] x2
This means calculate everything inside the brackets, then multiply what you get by 2. This answer will be a negative number. Ignore the negative sign and round the number up, and that will be your recharge setting.
Example: If you want to cap it at 15-bps and your dwell is set to 40, the formula will look like this:
[ (40/2) + 33 - (1000/15) ] x2
This will give you -27.333. Ignore the negative and round it up, and you have 28.

http://www.zdspb.com/tech/mguide/ion/adj_electronics_bh.html

 

[Richiemonk]

I stand corrected. However i put bags into airplanes for a living soooooooo, i'll leave that to the mathmatitions amongst us

 

[Big Mac]

I was under the impression that they actually couldn't go below 12 (I think) due to something to do with the dwell being too high?