What is the best type of oil to use in a cocker, 3 in 1, gun oil? or do I need to buy certain stuff.
Cheers, Chris.
Cheers, Chris.
Best oil for Cocker?
- Thread starter chunk.Clan
- Start date
i bought a huge tub of castrol moly grease from halfords, fiver i think, and believe me, gonna last a whole long time(like probably my whole time balling)
greese attracts and holds dirt,while it maybe ok on your bolt,i woudn't recomend it in your internalls and regs
no, i didnt think you were. i didnt specify, and would be a bad thing to say use something that would ruin his marker.
sent it off to planet today, hoping they can fit a new babr. thats all i need, then experiment time with the trigger pull
sent it off to planet today, hoping they can fit a new babr. thats all i need, then experiment time with the trigger pull
You should not use Moly Grease (Molybdenum Disulfide) for Cars on your marker !.
Molykote and Molybdenum Disulfide (MoS2) Grease are not the same.
Molykote is designed for use at low temps (Shockers and C02).
Molybdenum Disulfide on the otherhand is designed for use at high temps.
Molykote does not contain Molybdenum, it's Silicone based with Lithium soap thickener..
SmartParts void's your warrenty if you use any other type of grease.
The place to buy Molykote 33 from is...
R W Greef
Timmis Rd
Lye, Stourbridge
West Midlands
DY9 7BJ
Tel: 01384 897969
These guy's are the UK distributers - nice and cheap.
These are Dow Cornings pages.. (Makers of DOW33)
http://www.dowcorning.com/applications/product_finder/pf_details.asp?l1=003&pg=00000963&prod=01889788&type=PROD
or
http://www.dowcorning.com/applications/product_finder/pf_details.asp?l1=001&pg=00000590&prod=01889770&type=PROD
Molykote is great for orings but I use ACI Airlube for internals.
Molykote and Molybdenum Disulfide (MoS2) Grease are not the same.
Molykote is designed for use at low temps (Shockers and C02).
Molybdenum Disulfide on the otherhand is designed for use at high temps.
Molykote does not contain Molybdenum, it's Silicone based with Lithium soap thickener..
SmartParts void's your warrenty if you use any other type of grease.
The place to buy Molykote 33 from is...
R W Greef
Timmis Rd
Lye, Stourbridge
West Midlands
DY9 7BJ
Tel: 01384 897969
These guy's are the UK distributers - nice and cheap.
These are Dow Cornings pages.. (Makers of DOW33)
http://www.dowcorning.com/applications/product_finder/pf_details.asp?l1=003&pg=00000963&prod=01889788&type=PROD
or
http://www.dowcorning.com/applications/product_finder/pf_details.asp?l1=001&pg=00000590&prod=01889770&type=PROD
Molykote is great for orings but I use ACI Airlube for internals.
Stiler, I have used the moly grease in all my markers without a problem(about 6).
And you can get 3 different type, light, medium and V(thick) the medium is the one you want. Also the molygrease is for frictional surfaces so it does the job well
And you can get 3 different type, light, medium and V(thick) the medium is the one you want. Also the molygrease is for frictional surfaces so it does the job well
i use vaselene on the bolt of my cocker...everything else runs dry....just a drop of oil in the asa now and then